|
| |
|
|
 |
Miracle Shield is a
revolutionary coating that adds luster without the use of
silicones or waxes. Miracle Shield dries crystal clear
without any buffing, and protects without leaving a greasy
or oily feel like the other nationally advertised
"protective coatings".
Cleans, protects and
beautifies: vinyl, leather, wood, plastics, carpets, chairs,
autos, trucks, TV's, boats, rubber, and most painted
surfaces.
It even protects against
mildew growth, graffiti and wear on virtually all non-cloth
surfaces.
It's guaranteed never to
chip, crack or peel and will never yellow. It is
non-flammable and non-toxic and contains no harmful oils or
waxes. |
|
Surfaces
Use Miracle Shield on the following surfaces:
-
Vinyl
-
Plastic
-
Rubber
-
Metal
-
Interior Wood
-
Roof's
-
Concrete
-
Asphalt
-
Stone Work
-
Brick Work
NOTE: Outdoor applications should be a
minimum of two coats solution.
Finish- Miracle Shield will dry to a
satin or low-luster semi-gloss finish. Which is scratch
resistant. There is no buffing required.
Application- Miracle Shield can be
applied as follows:
Miracle Shield hardens best at a surface
temperature of 55 degrees or higher on an average of 15-20
minutes.
Surface Preparation- In order for
Miracle Shield to work properly, the surface must be free
from any dust, dirt grease, grime or wax. You can remove any
oil, wax or grease with household rubbing alcohol.
Miracle
Shield MSDS |
Cleaning Properties- Miracle Shield
has no known cleaning properties such as some other
multi-purpose sealants. However, some applications have
shown that mild mars, rust and stains have been removed when
applied.
Viscosity- The thickness of Miracle
Shield is determined by it's application. The standard
application is either by brush, spraying or rolling. With
standard applications, about 2 mil. of product is realized
per coat.
Product Indications/Preparation-
Miracle Shield comes already mixed and ready for use right
out of the container. There is no mixing or dilution
necessary.
-
No mixing
-
No diluting
-
No concentrates to
bother with
-
Water Soluble
-
Ready to use
-
Cleans with soap and
water when wet
-
Cleans with alcohol
when dry
Restrictions- Miracle Shield is not
to be used on glass, mirrors, chrome or brass.
Hazards- Miracle Shield is a mixture
of 55% water and 45% chemical solvent.
-
Combustible fumes are
emitted in it's wet state
-
Perfectly safe in
it's dry state
-
When applying,
ventilate area of application well
-
Keep container closed
when not in use
Protects Against:
Additional Info on Miracle Shield |
|
Elastomeric Clear Sealer, Finish Click
Here |
|
|
